ObjReader Community

WIP => WIP => Topic started by: Patrice Terrier on April 07, 2016, 11:09:44 am

Title: BAC_MONO
Post by: Patrice Terrier on April 07, 2016, 11:09:44 am

I started to work on that one, it was on my back burner for a long time, because the amount of work to render it good inside ObjReader is huge, so it could take a while before full completion.

(http://www.objreader.com/download/images/BM_01.png)

(http://www.objreader.com/download/images/BM_02.png)

Most of these shall be hidden, however it was a hard piece of work to fix all the normal errors.
(http://www.objreader.com/download/images/BM_03.png)

The final engine
(http://www.objreader.com/download/images/BM_04.png)

...

Title: Re: BAC_MONO
Post by: Patrice Terrier on April 15, 2016, 08:58:47 pm

The full body revisited

Before

(http://www.objreader.com/download/images/BM_original.png)


After

(http://www.objreader.com/download/images/BM_05.png)

...

Title: Re: BAC_MONO
Post by: Patrice Terrier on April 23, 2016, 08:36:53 pm

Close to full completion

(http://www.objreader.com/download/images/BM_07.png)

and very close to the original

(http://robotpig.net/_images/posts/bacmono_2.jpg)

...

Title: Re: BAC_MONO
Post by: Michael Lobko-Lobanovsky on April 24, 2016, 07:14:16 am

It's looking awesome, Patrice, almost as exquisite as The Time Machine at these angles, and I can't wait till I lay my hands on the actual model. :)

Title: Re: BAC_MONO
Post by: Patrice Terrier on April 24, 2016, 03:32:29 pm

Mike

So glad to see you are back!

I have been working on this model at full time since your last private message...

And that's the one i came with, just before the official release

(http://www.objreader.com/download/images/BM_08.png)


This is the "blue print" i made to create the body

(http://www.objreader.com/download/images/bm_bp.png)


(http://www.objreader.com/download/images/bp_work.png)

...

Title: Re: BAC_MONO
Post by: Patrice Terrier on April 24, 2016, 08:51:48 pm

And the body with its final texture materials

(http://www.objreader.com/download/images/BM_09.png)

...

Title: Re: BAC_MONO
Post by: Michael Lobko-Lobanovsky on April 25, 2016, 10:00:37 am

Do you mean to say you've created this model entirely from scratch (from blueprints)?

Title: Re: BAC_MONO
Post by: Patrice Terrier on April 25, 2016, 08:24:10 pm

I made this blueprint to create the body, because the one i started with, from Therry Dalet (alias "titi95") was full of errors, and i couldn't used it to produce a glossy surface like the one i have now. Then i found the model from Guillermo Abalos Ventoso (alias "Millergo").
Indeed the resulting model is a complete remixed work, with a specific texture set that i made from photos found on the web site of the Briggs Automotive Company (http://www.bac-mono.com)

So far, i still have a problem to figure how the real oïl tank looks like, i was unable to find a picture of it, even on the brochure.

Everytime i think i am ready to post the model, something new pops up, that forces me to keep working on it.

...

Title: Re: BAC_MONO
Post by: Patrice Terrier on April 25, 2016, 09:40:29 pm

Example of texture details, based on the real one.

(http://www.objreader.com/download/images/BM_SW.png)

Title: Re: BAC_MONO
Post by: Patrice Terrier on April 26, 2016, 02:26:39 pm

If ever you want to create a custom body material, here is the official color set:

(http://www.objreader.com/download/images/teintes.png)

...

Title: Re: BAC_MONO
Post by: Michael Lobko-Lobanovsky on April 26, 2016, 08:59:55 pm

IT IS COOL!

Is it supposed to have some sort of a windshield?

Title: Re: BAC_MONO
Post by: Patrice Terrier on April 26, 2016, 10:18:21 pm

Quote

Is it supposed to have some sort of a windshield?

No windshield, except the helmet that is a prerequisite to drive this car just like with a real F1.

Title: Re: BAC_MONO
Post by: Patrice Terrier on April 27, 2016, 09:29:23 pm

The official version has been posted into the car section, with a few minor changes, including a {very} small windshield.

...